ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.
- Built-in laser beam alignment system speeds accurate, reliable positioning.
- Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
- Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
- Weatherproof, sunlight-filtering case for indoor & outdoor use.
- Anti-frost system so that beam functions even in extreme conditions.
- Automatic input power filtering with special noise rejection circuitry.
- NC/NO alarm output.
- N.C. tamper circuit included.
- Non-polarized power inputs.
- Quick, easy installation with built-in laser beam alignment system.
- Interruption time adjustable for nearly all situations.
These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.
Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed.
No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.
- Rugged aluminum construction.
- LED alignment indicator.
- No synchronizing wires required.
- NO/NC relay output.
- Weatherproof IP65 construction.
- Slimline design (7/8"x1-5/16").
- Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable).
- For windows, doorways, etc., where space is limited.
- L-brackets and mounting hardware included.
The Infrared Photoeye Sensor IRB-325 is an external entrapment protection, device-type B1, non-contact sensor for use with automatic gate operators. The IRB-325 produces a detection signal when the infrared beam is broken.
Benefits include:
- UL 325 compliant
- Long range
- Powder coated steel hoods
- provide damage protection
Features
- Range: 6 to 65 feet
- Power: 12V to 24V DC or AC 150mA
- Relay Contacts: 30V 1A
- Housing: UL and CSA Type 4, 4X, 3, 3R, 12 13 Rating
- Dimensions: Height = 5.03”, Width = 3.06”, Depth = 3.02”
- Operating Temperature: -40F to +170F
The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators.
Features
- Works without lenses so it is easy to align
- Electronic sunlight filter
- Automatic compensation for temperature changes
- 24 degrees of alignment freedom
- Capable of penetrating 70% obstruction due to fog, steam and even spray
- Immune to vibration
- Does not require additional signal amplifiers or relay boxes
- Infrared transmitter in a weather-proof NEMA 4X enclosure
- Infrared receiver in a water-proof NEMA 4X enclosure including 5A120V AC relay output
Optional Accessories
- Two liquid tight strain relief's
- Two protective hoods
- Two L-shaped mounting brackets
- All the necessary mounting screws and hex nuts
- Off-delay timer adjustable for 0-15 seconds
© 2019 Logical Decisions, Inc
Home | Gate Operators | Crash Gates | Access Control | Prisons | FenceTies | Design | Accessories | Service | Contact Us | Blog | Sitemap
1-800-676-5537
1-225-274-1115
